We also make Boat Trailer Wheels, Stormwater Grates, and our In-House Diecasting Foundry is available for most other diecasting needs.
Many of the major chain hardware stores like Bunnings or Mitre 10 have special order counters where you can request specific colours and styles from our range, regardless of whether or not they are a frequently stocked item.
The store will then order it in especially for you or you can order right here from our SHOP.
It is not necessary to get a builder to install your new freestanding letterbox, as there should be an included instruction sheet with details on how to assemble the box yourself.
The parts are quite simple to assemble, though we do advise cementing the letterbox into the ground to keep it in place.
This can be easily done yourself, by digging a hole to the required depth and purchasing some quick-setting cement (follow the manufacturer’s instructions when using the cement).
If you have lost your Velox Freestanding instruction sheet, click on the link below to download a copy of it:
Our Brick In boxes have keys adhered to the top of the box.
These can occassionally get forgotten and built in so remind your builder to remove them first.
If they are lost or accidentally built in, a call to us on (02) 9542 1700 maybe able to resolve your problem.
To request a quote on a bank of Velox letterboxes, please have the following information ready:
Once you have decided upon the above specifications, give us a call on (02) 9542 1700, email us at firstname.lastname@example.org, or fax your details to us at (02) 9542 1505 and we will arrange a quote on the spot.
Because we manufacture our products onsite, often we are able to make adjustments to suit your needs.
Give us a call on (02) 9542 1700 to discuss your specific requirements.
Because all our letterboxes are made locally at Kirrawee, you can purchase parts for any of our boxes.
A call to our office on (02) 9542 1700 should resolve your problem quickly.
Aluminium does not rust.
However, it can develop erosion, or “pitting” with long exposure to salt spray, so we recommend a powdercoated or anodised finish in this type of area.
Yes, check out our partner company J. Bazzano & Sons’ website at www.diecastings.com.au